120WV4 1.2516 Cold Working Tool Steel

group name: Tool Steel Bars

Min Order: 1 piece

brand name: fushun

model: 120WV4 1.2516

Nearest port for product export: Tianjin, Qingdao, Shanghai, Huangshi

Delivery clauses under the trade mode: FOB, CFR, CIF, CIP, CPT, DDP, DDU, DAF

Acceptable payment methods: T/T, L/C, D/P D/A

update time: Tue, 25 Apr 2023 10:56:20 GMT

contact supplier

Paramtents

Delivery Condition +N or +A or +QT
Surface Condition black or turned or polished

Packging & Delivery

Min Order1 piece

Briefing

120WV4 1.2516 Cold Working Tool Steel Round Bar ISO 9001 certified, On-time Delivery, Leading Global Supplier

Detailed

120WV4 1.2516 Cold Working Tool Steel

Introduction:

Low alloyed W cold working tool steel.

Applications:

Twist drills and tapes, ejectors, punches, reamers, countersinks, engraving tools, metal cutting saws. Usually delivered as silver steel.

Quality Standard:

BS EN ISO 4957 Tool Steel

All Grades Comparison:

Material No.	EN
1.2516	120WV4

Chemical Composition(%)

C	Si	Mn	P	S	Cr	W	V
1.15-1.25	0.15-0.30	0.20-0.35	0.035 max	0.035 max	0.15-0.25	0.90-1.10	0.07-0.12

HEAT TREATMENT:

SOFT ANNEALING: Heat to 720-750oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 230.

STRESS RELIEVING:Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

HARDENING:Harden from a temperature of 760-820oC, 800-840oC followed by water or oil quenching. Hardness after quenching is 64-66 HRC.

TEMPERING: Tempering temperature: 150-250oC. See the data bellow.

Tempering Temperature	Hardness(HRC)
100oC	66
200oC	65
300oC	59
400oC	53

Mill′s test certificate:

EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.